SUPER PURGE Floor Finish Solubilizer 5 Gal. Pail (NCL1056-20)

This Product is out of stock, a special order item,
or no longer available

If you need assistance with this item or finding a replacement product, please give us a call at 1-888-792-2166 or send an email to customer service.

Summary
A unique floor finish re-emulsifier and extra heavy-duty stripper, designed for use in heavy build up areas that have been high speed burnished. Comprised of synergistic solubilizers in combination with emulsifiers, chelating and anti-redeposition agents, and a new type of penetrant in a pH controlled base allow a speed and efficiency never before attainable. A unique floor finish re-emulsifier and extra heavy duty stripper, designed for use in heavy build up areas that have been high speed burnished.

** Please note: shipping lead time 3-7 business days

Product Description

A unique floor finish re-emulsifier and extra heavy-duty stripper, designed for use in heavy build up areas that have been high speed burnished. Comprised of synergistic solubilizers in combination with emulsifiers, chelating and anti-redeposition agents, and a new type of penetrant in a pH controlled base allow a speed and efficiency never before attainable. 

Code: 1056
Packaging: 55 Gal. Drum; 5 Gal. Pail; 4 x 1 Gal./Case

Directions

Mop/Wet Vacuum Stripping System: Dilute SUPER PURGE™ with cold, hard or soft water for use. The amount of SUPER PURGE™ for each stripping job will depend upon the amount of finish build up on the floor.

Heavy Duty Buildup: 1 part solubilizer to 4 parts water.
Light / Medium Duty Buildup: 1 part solubilizer to 8 parts water.

Apply diluted solution of SUPER PURGE™ liberally to the floor, using an area small enough to complete in 20-30 minutes (to avoid drying). Allow SUPER PURGE™ to stand for 5 minutes, then pick up the liquified finish with a squeegee equipped wet vacuum. Repeat this procedure until the floor is completely stripped. Rinse thoroughly with clear water and mop or vacuum dry.

Floor Machine Stripping System:
Heavy Duty Buildup: 1 part solubilizer to 6 parts water.
Light / Medium Duty Buildup: 1 part solubilizer to 16 parts water.

Follow the manual directions above, except agitate well with a floor machine equipped with a stripping pad and remove solubilized finish with a wet vacuum and rinse.

Note: Asphalt tile, Linoleum, and other sensitive floor surfaces may be damaged by contact with stripping solution.  We recommend that a spot test be conducted before general use.


Safety

DANGER: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE. KEEP OUT OF THE REACH OF CHILDREN
Precautionary statement:
Prevention: Do not breathe mist or vapor. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Wear protective gloves/protective clothing/eye protection/face protection.
Response: If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor. Wash contaminated clothing before reuse.
Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations. 
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List.
Additional safety measures:
Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.


Documentation

Technical Data Sheet Super Purge TDS English GHS.pdf

Safety Data Sheet SUPER PURGE SDS English.pdf

Product Specs

  • Color ... Blue
  • Odor ... Sassafras
  • pH ... 13.4
  • Specific Gravity (gr/cc) ... 1.03 ± 0.01
  • Density (lbs/gal) ... 8.72
  • Viscosity (cps) ... < 10 cP
  • Flammability (TOC) ... None
  • Solubility ... Complete
  • Upper Cloud ... >140°F
  • Lower Cloud ... < 34°F
  • Biodegradability ... Complete
  • Finish Penetration ... Milky less than 20 seconds
  • Wax Removal ... Excellent
  • Cleaning ... Excellent
  • Shelf Life ... 1 year minimum in original unopened container

National Chemical Laboratories
Victory Innovations