SOIL-LOK Penetrating Grout Sealer 12/32 oz (1 Qt.) Case (NCL2521-45)

Janitorial & Sanitation Supplies → Floor & Carpet Care → SOIL-LOK Penetrating Grout Sealer 12/32 oz (1 Qt.) Case (NCL2521-45)

SOIL-LOK Penetrating Grout Sealer 12/32 oz (1 Qt.) Case (NCL2521-45)

Price: $208.75

Summary

A safe yet effective daily cleaner for all types of ceramic tile and grout. A pH neutral, concentrated cleaner for all types of glazed and unglazed ceramic tile, porcelain and monocottura tile surfaces. Leaves surfaces clean and sparkling with no residue. An excellent choice for cleaning ceramic tile in foyers, lobbies, corridors, showrooms and many other areas.

** Please note: shipping lead time 3-7 business days

Product Description

Uniquely designed for ceramic tile grouting, this exceptional product repels dirt, oil and water; keeps grout looking bright. A water-based penetrating sealer that repels oil, dirt and moisture from grout. Detergent washable, this product will keep grout looking like new. Does not change the original color of grout. SOIL- LOK™ allows for vapor transmission to prolong grout life. Can be used indoors or outdoors. Mild odor.

Code: 2521

Packaging: 12 x 32 oz Qt./Case

Features & Benefits

Use indoors or outdoors / VOC Compliant
Easy to apply

UV resistant

Rapid surface penetration

Repels dirt, oil, and moisture from grout

Allows vapor transmission

Protects against stains

Directions

Test in an inconspicuous area for suitability prior to application. For new installations, sealer can be applied 48 hours after grouting. Grout joints must be clean, dry and free of existing sealers and coatings.

Apply 1 to 2 coats with a soft-bristle paint brush or sponge paint applicator. Using cotton or paper towels, remove any sealer remaining on the tile within 3 to 5 minutes of application. If 2 coats are applied, allow a minimum of 30 minutes drying time between coats. Ready for surface traffic 2 hours after final coat. Sealed area should be kept dry for 12 hours.

Achieves a full cure in 24 hours. Conduct a test to determine if surface is completely sealed after 2 hours by applying water droplets to the surface. If water is absorbed, apply an additional coat. Wait 2 hours and repeat the test.

Coverage: Approx. 1000 lin. Feet per gallon (304m).

Safety

WARNING: CAUSES EYE IRRITATION. KEEP OUT OF THE REACH OF CHILDREN
Precautionary statement:
Prevention: Wash thoroughly after handling.
Response: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Storage: Store in a well-ventilated place. Keep cool.
Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations.
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List.
Additional safety measures:
Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.